header top curve
Home   >   Industries   >   Flat Panel Display   >   Cell Process for flat panel display applications   >   Optimizer® Filters   >   Optimizer® Point-of-Use Photochemical Filters

Industries

Select one or more of the following fields in order to begin your search.
  Search by Industry   Applications or process step   Keyword or Product Name      
   and/or   and/or      Search

Special Note: Some product links may direct you to our peripheral websites (devicecare.com, diskcare.com, entegrisfluidhandling.com, wafercare.com, entegris-services.com, or entegrisfuelcells.com)

Optimizer Point-of-Use Filter Family

Photochemical filters for point-of-use (POU) applications
 
Optimizer Point-of-Use Filter Family
  • Advanced filtration media: optimizes filtration and particle retention capabilities
  • DI water, solvents and other photochemical filtration applications
  • UPE membrane spontaneously wets and stays wet in solvents
 
Optimizer DI Cartridge Filters
Materials:
Membrane: Patented surface-modified hydrophilic ultra-high molecular weight polyethylene (UPE)

Supports: High-density polyethylene (HDPE) supports, end caps, support, cage, core

O-rings: EPDM, Kalrez® perfluoroelastomer or Teflon® fluoropolymer encapsulated Viton® fluoroelastomer (TEV)
Filtration area:
16-stack 1600 cm2 (248 in2)

40-stack 3200 cm2 (496 in2)
Maximum operating conditions:
Maximum operating pressure: 0.345 MPa (3.45 bar; 50 PSID) at 20°C (68°F)

Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar; 40 PSID) at 25°C (77°F)

Maximum operating temperature: 60°C (140°F)
Optimizer D PR Disposable Filters
Materials:
Membrane: Hydrophobic ultra-high molecular weight polyethylene (UPE)

Core and housing: Polypropylene

Supports: High-density polyethylene (HDPE)
Membrane area:
0.02 μm: 2200 cm2 (2.37 ft2)

0.03 μm: 1900 cm2 (2.05 ft2)

Other: 1800 cm2 (1.94 ft2)
Maximum operating conditions:
Maximum operating pressure: 0.34 MPa (3.4 bar; 50 PSID) at 25°C (77°F)

Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar; 40 PSID) at 25°C (77°F)

Maximum operating temperature: 40°C (104°F)
Optimizer D PR and D PR-L Disposable Filters
Materials:
Membrane: Hydrophobic ultra-high molecular weight polyethylene (UPE)

Core and housing: Polypropylene

Supports: High-density polyethylene (HDPE)
Membrane area:
3600 cm2 (3.88 ft2)
Maximum operating conditions:
Maximum operating pressure: 0.34 MPa (3.4 bar; 50 PSID) at 25°C (77°F)

Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar; 40 PSID) at 25°C (77°F)

Maximum operating temperature: 40°C (104°F)
Optimizer ST DEV Disposable Filters
Materials:
Membrane: Patented surface-modified hydrophilic ultra-high molecular weight polyethylene (UPE)

Supports: High-density polyethylene (HDPE) supports, core and sleeve

Disposable shell: Polypropylene

O-ring: EDPM, Kalrez® perfluroelastomer
Filtration area:
4500 cm2 (697.5 in2 )
Connections:
Inlet/Outlet: :* 3⁄4” and 1⁄2” male Flaretek®

Vent/Drain: 1⁄4” male Flaretek®
Maximum operating conditions:
Maximum inlet pressure: 0.39 MPa (3.9 bar, 57 PSI) at 25°C (77°F)

Maximum forward/reverse differential pressure: 0.28 MPa (2.8 bar, 40 PSID) at 25°C (77°F)

Maximum operating temperature: 40°C (104°F)
*Other connections are available. Please contact your local representative.
Optimizer DEV Cartridge Filters
Materials:
Membrane: Patented surface-modified hydrophilic ultra-high molecular weight polyethylene (UPE)

Supports: High-density polyethylene (HDPE) supports, end caps, support, cage, core

O-rings: EPDM, Kalrez® perfluoroelastomer or Teflon® fluoropolymer encapsulated Viton® fluoroelastomer (TEV)
Filtration area:
16-stack 1600 cm2 (248 in2)

40-stack 3200 cm2 (496 in2)
Maximum operating conditions:
Maximum operating pressure: 0.345 MPa (3.45 bar; 50 PSID) at 20°C (68°F)

Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar; 40 PSID) at 25°C (77°F)

Maximum operating temperature: 60°C (140°F)