header top curve
Home   >   Industries   >   Semiconductor   >   Wet Etch and Clean   >   Wafergard® Gas Filters   >   Wafergard® GT-Plus In-Line Gas Filters

Industries

Select one or more of the following fields in order to begin your search.
  Search by Industry   Applications or process step   Keyword or Product Name      
   and/or   and/or      Search

Special Note: Some product links may direct you to our peripheral websites (devicecare.com, diskcare.com, entegrisfluidhandling.com, wafercare.com, entegris-services.com, or entegrisfuelcells.com)

Wafergard GT-Plus In-line Gas Filters

Remove particles from inert gases for flow rates up to 30 SLPM
 
Wafergard GT-Plus In-line Gas Filters
  • Efficient, low-cost point-of-use filtration of inert gases
  • For flow rates up to 30 SLPM
 
Wafergard GT-Plus In-line Gas Filters
Materials:
Membrane: Hydrophobic Teflon® fluoropolymer PTFE

Supports/housings: PFA

Connections: 1⁄8”, 1⁄4” compression seal

Membrane area: 12 cm2 (1.9 in2)
Particle retention:
>99.9999999% removal of all particles greater than 0.003 μm diameter (verified at the most penetrating particle size)
Operating conditions:
Maximum operating pressure: 0.41 MPa (4.1 bar, 56.6 PSID) at 20°C

Maximum forward differential pressure: 0.34 MPa (3.4 bar, 50 PSID) at 20°C)

Maximum reverse differential pressure: 0.03 MPa (0.3 bar, 4.35 PSID) at 20°C

Maximum operating temperature: 50°C (122°F)
Dimensions:
Diameter: 21.5 mm (0.85”)

Length: 1⁄8” seal: 69 mm (2.7”); 1⁄4” seal: 71.5 mm (2.8”)
Related Products