header top curve
Home   >   Home   >   Industries   >   Industries   >   Semiconductor   >   Semiconductor   >   Wet Etch and Clean   >   Wet Etch and Clean   >   Wafergard® Gas Filters   >   Wafergard® Gas Filters   >   Wafergard® Gas Filters   >   Wafergard® Gas Filters   >   Wafergard® T-Line Gas Filters

Industries

Select one or more of the following fields in order to begin your search.
  Search by Industry   Applications or process step   Keyword or Product Name      
   and/or   and/or      Search

Special Note: Some product links may direct you to our peripheral websites (devicecare.com, diskcare.com, entegrisfluidhandling.com, wafercare.com, entegris-services.com, or entegrisfuelcells.com)

Wafergard T-line Gas Filters

Clean, dry air for industrial applications
 
Wafergard T-line Gas Filters
  • Flow rates of up to 1500 SLPM (50 SCFM)
  • Effectively retains particles of 0.003 μm size and above
  • Easy filter replacement without breaking gas line connections
  • For use in non-toxic and non-flammable inert gas
  • Available with 6-stack, 12-stack and 40-stack gas cartridge filters
 
Wafergard T-line Gas Filters
Materials:
Head and bowl are electropolished 316 stainless steel with Viton® o-ring

6-Stack and 12-Stack Filter: Hydrophobic Durapore® PVDF membrane supported by molded polysulfone stacked disk

40-Stack Filter: Hydrophobic Teflon® PTFE membrane supported by molded Halar® ECTFE stacked disk

Filter Seal: Viton® o-ring (alternate EPR o-ring seal included)
Filter area:
6-stack 300 cm2 (46.5 in2)

12-stack: 600 cm2 (93.6 in2)

40-stack: 2000 cm2 (2.2 ft2)
Particle retention:
Greater than 99.9999999% removal of all particles (referenced at the most penetrating particle size)
Removal rating:
0.003 μm
Flow rate:
6-stack: up to 300 SLPM (10 SCFM)

12-stack: up to 600 SLPM (20 SCFM)

40-stack: up to 1500 SLPM (50 SCFM)
Operating conditions:
Maximum inlet pressure: 10.5 bar (150 PSIG) at 20°C (68°F), 3.5 bar (50 PSID) at 100°C (212°F)

Maximum differential pressure: 4 bar (60 PSID) at 20°C (68°F)

Maximum back pressure: 0.7 bar (10 PSID) at 20°C (68°F)

Maximum recommended temperature: 120°C (248°F)
Warranty:
2 year