header top curve
Home   >   Home   >   Industries   >   Industries   >   Semiconductor   >   Semiconductor   >   Wet Etch and Clean   >   Wet Etch and Clean   >   Wafergard® Gas Filters   >   Wafergard® Gas Filters   >   Wafergard® Gas Filters   >   Wafergard® Gas Filters   >   Wafergard C2 1.125" C-Seal Gas Filters

Industries

Select one or more of the following fields in order to begin your search.
  Search by Industry   Applications or process step   Keyword or Product Name      
   and/or   and/or      Search

Special Note: Some product links may direct you to our peripheral websites (devicecare.com, diskcare.com, entegrisfluidhandling.com, wafercare.com, entegris-services.com, or entegrisfuelcells.com)

Wafergard C2 1.125" C-Seal Surface Mount Sandwich Gas Filters

All-metal ultrapure filter dramatically reduces footprint
 
Wafergard C2 1.125" C-Seal Surface Mount Sandwich Gas Filters
  • Provides the industry’s best filter in a surface-mount design
  • Inlet feed through to device mounted above provides filtration/protection of returning gas to ensure cleanliness for downstream devices
  • Available with nickel or stainless membrane
 
Wafergard C2 1.125" C-Seal Surface Mount Sandwich Gas Filters
Materials:Membrane:
Patented, sintered nickel membrane or stainless steel membrane
Housing base block:
316L double-melt stainless steel electropolished, SEMI F20
Surface finish, interior:
<5 μin Ra
Helium leak rating:
Qualified: 2 `10-10 cc/min. Tested: 1`10 -9 cc/min.
Performance:Downstream cleanliness:
Particles: Less than 0.03 particles/Liter (<1 particle/ft3) greater than 0.01 m
Volatiles: Volatile outgassing of H2O, O2 and THC is below detectable limits (by RGA and FID at room temperature)
Particle retention: Greater than 99.9999999 (9 LRV) removal of all particles (referenced at the most penetrating particle size)
Removal rating: >0.003 μm
Operating conditions:Maximum inlet pressure: 20.7 MPa (207 bar; 3000 PSIG)
Maximum forward/ reverse differential pressure: 0.86 MPa (8.6 bar; 125 PSID)
Maximum operating temperature:
Inert gases: 400°C (752°F) @ 35 bar (500 PSIG)
Corrosive and reactive gases: 50°C (122°F) @ 35 bar (500 PSIG)