Close
 
header top curve
Home   >   Products   >   Filtration   >   Liquid Filtration   >   Solvents   >   Impact® 2 Photochemical Filters

Products

Select one or more of the following fields in order to begin your search.
  Search by Industry   Applications or process step   Keyword or Product Name      
   and/or   and/or      Search

Special Note: Some product links may direct you to our peripheral websites (devicecare.com, diskcare.com, entegrisfluidhandling.com, wafercare.com or entegrisfuelcells.com)

Impact® 2 Disposable Filters

Rapid change-out UPE membrane filters for point-of-use photochemical filtration, including photoresists and solvents
Data Sheet (102030)
 
Impact® 2 Disposable Filters
  • Optimized for use with the Impact® 2 manifold
  • Point-of-use photochemical and solvent filtration
  • Minimal chemical exposure, rapid connection design
  • Low hold-up volume minimizes chemical waste
 
Impact® 2 Disposable Filters
Materials:
 Membrane: Ultra-high molecular-weight polyethylene (UHMWPE)

Supports (upstream, downstream and mold): High-density polyethylene (HDPE)
Manifold fittings:
 6.35 mm Flowell® 60 type

5/3 mm Flowell® 60 type

6/4 mm Flowell® 60 type

6.35 mm Super Type Pillar®
Maximum operating conditions:
 Maximum inlet pressure: 0.34 MPa (3.4 bar, 50 PSI) @ 25°C (77°F)

Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar, 40 PSI) @ 25°C (77°F)

Maximum operating temperature: 40°C (104°F)
Membrane area:
 0.01 μm: 1,390 cm2 (1.5 ft2)

0.02 μm: 1,300 cm2 (1.4 ft2

All others: 1,000 cm2 (1.08 ft2)
Hold-up volume:
 <=55 cc
Compatibility:
 PGMEA, PGME, NMP, ethyl lactate, MMP and cyclohexanone
Wettability:
 Spontaneously wets in butyl acetate, PGMEA, PGME, ethyl lactate, MMP, ECA, NMP