header top curve
Home   >   Products   >   Filtration   >   Liquid Filtration   >   Impact® Filters   >   Impact® Plus Filters

Products

Select one or more of the following fields in order to begin your search.
  Search by Industry   Applications or process step   Keyword or Product Name      
   and/or   and/or      Search

Special Note: Some product links may direct you to our peripheral websites (devicecare.com, diskcare.com, entegrisfluidhandling.com, wafercare.com, entegris-services.com, or entegrisfuelcells.com)

Impact Plus Filter

Point-of-use filter for photochemicals: including photoresists and solvents
 
Impact Plus Filter
  • Ultra-high molecular weight polyethylene (UPE) membrane technology
  • Rapid filter change-out design
  • Low hold-up volume limits chemical waste
  • Designed for use with the Impact® ST manifold and IntelliGen® Mini dispense system
 
Impact Plus Duo Filters
Materials:Seiving membrane: Ultra-high molecular weight polyethylene (UPE)
Nonsieving layer: Polyamide
Supports: PE (upstream and downstream)
Molding: HDPE
Manifold/fittings: With Impact ST manifold
Dimensions:Heighht: 90 mm (3.54")
Width: 71.9 mm (2.83")
Depth: 95.5 mm (3.76"")
Maximum Operating Conditions:Maximum inlet pressure: 0.34 Mpa (3.4 bar, 50 PSI) @ 25°C
Maximum forward/reverse differntial pressure: 0.27 MPa (2.7 bar, 50 PSI) @ 25°C
Maximum operating temperature: 40°C (104°F)
Hold up volume:<55 cc
Compatibility:PGMEA, PGME, NMP, ethyl lactate, MMP, and cyclohexanone. Not recommended for use with photochemicals containing aromatic hydrocarbons
Wettability:Spontaneously wets in butyl acetate, PGMEA, PGME, ethyl lactate, MMP, ECA and other photochemical solvents
Impact Plus Filter
Materials:Ultra-high molecular-weight polyethylene (UPE)
Supports and molded components: High-density polyethylene (HDPE)
Dimensions:Height: 90 mm (3.54")
Width: 71.9 mm (2.83")
Depth: 95.5 mm (3.76")
Maximum operating conditions:Maximum inlet pressure: 0.34 MPa (3.4 bar, 50 PSI) @ 25°C (77°F)
Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar, 40 PSI) @ 25°C (77°F)
Maximum operating temperature: 40°C (104°F)
Membrane Area:0.01 µm 1390 cm2 (1.5 ft2)
0.02 µm 1300 cm2 (1.4 ft2)
All others 1000 cm2 (1.08 ft2)
Holdup volume:<55 cc
Flow rate @1cPs 0.059 MPa
(0.59 bar, 8.53 PSI)		0.01 µm >10 cc/sec.
(0.59 bar, 8.53 PSI)0.02 µm >10 cc/sec.
0.03 µm >8.33 cc/sec.
0.05 µm >13.33 cc/sec.
0.10 µm >18.33 cc/sec.
Compatibility:PGMEA, PGME, NMP, ethyl lactate, MMP and cyclohexanone. Not recommended for use with photochemicals containing aromatic hydrocarbons.
Wettability:Spontaneously wets in butyl acetate, PGMEA, ethyl lactate, MMP, ECA, NMP and other photochemical solvents
  • Rapid filter changeout with minimal dripping: no tools and no draining required
  • Compact design provides easy installation or retrofit into existing tools
Impact Plus PCM
Materials:Membrane: Hydrophilic ultra-high molecular weight polyethylene (UPE)
Supports and molded components:High-density Polyethylene (HDPE)
Maximum operating conditions:Maximum inlet pressure: 0.34 MPa (3.4 bar, 50 PSI) @ 25°C
Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar, 40 PSI) @ 25°C
Maximum operating temperature: 40°C
Maximum operating temperature:40°C
Retention rating:0.02 μm and 0.05 μm
Membrane area:1,300 cm2 (1.4 ft2)
Compatibility:PGMEA, PGME, NMP, Ethyl lactate, MMP, and cyclohexanone. Not recommended for use with photochemicals containing aromatic hydrocarbons.
Wettability:Water and other photochemical solvents
Related Products