Close
 
header top curve
Home   >   Products   >   Filtration   >   Liquid Filtration   >   Solvents   >   Impact® Plus Filter

Products

Select one or more of the following fields in order to begin your search.
  Search by Industry   Applications or process step   Keyword or Product Name      
   and/or   and/or      Search

Special Note: Some product links may direct you to our peripheral websites (devicecare.com, diskcare.com, entegrisfluidhandling.com, wafercare.com or entegrisfuelcells.com)

Impact® Plus Filter

Point-of-Use filter for photochemicals: including photoresists and solvents
Data Sheet (424006)
 
Impact® Plus Filter
  • Ultra-high molecular weight polyethylene (UPE) membrane technology
  • Rapid filter change-out design
  • Low hold-up volume limits chemical waste
  • Designed for use with the Impact® ST manifold and IntelliGen® 2 dispense system
 
Impact® Plus Duo Filters - UPE Seiving and Polyamide Nonseiving Membrane Layers
Materials:
 Seiving membrane: Ultra-high molecular weight polyethylene (UPE)

Nonsieving layer: Polyamide

Supports: PE (upstream and downstream)

Molding: HDPE

Manifold/fittings: With Impact ST manifold
Dimensions:
 Heighht: 90 mm (3.54")

Width: 71.9 mm (2.83")

Depth: 95.5 mm (3.76"")
Maximum Operating Conditions:
 Maximum inlet pressure: 0.34 Mpa (3.4 bar, 50 PSI) @ 25°C

Maximum forward/reverse differntial pressure: 0.27 MPa (2.7 bar, 50 PSI) @ 25°C

Maximum operating temperature: 40°C (104°F)
Hold up volume:
 <55 cc
Compatibility:
 PGMEA, PGME, NMP, ethyl lactate, MMP, and cyclohexanone. Not recommended for use with photochemicals containing aromatic hydrocarbons
Wettability:
 Spontaneously wets in butyl acetate, PGMEA, PGME, ethyl lactate, MMP, ECA and other photochemical solvents
Related Products