Integra® Manual Valves, 1/2" Orifice, 2-way, 1/4-turn, High Pressure
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
The high pressure capability of this valve gives you greater system flexibility in high pressure applications including:
- High-purity, corrosive chemical handling
- Wet etch and clean (WEC) process chemicals
- Low volume bulk chemical delivery applications
- Chemical line sizes 1/2" or larger
Specifications
FlareLock II Fitting Design
The patented FlareLock II fitting design (-II) combines the gripping power of a grooved tube, the security of a locking ferrule mechanism and the compact, leak-free design of the Flaretek fitting body. The fitting body, split locking ring and nut are all PFA material. A specific FlareLock II fitting groove tool is also available.
Dimension Note:
Dimensions are the same regardless of body material (PVDF or ECTFE) or nut material (PVDF, PFA, CPFA or FlareLock II).
Port Connection | Flow Factor Cv (Kv) | Dimension A |
1/2" Flaretek | 1.9 (27.2) | 5.28" (134.1 mm) |
1/2" PureBond fusible pipe | 3.2 (45.7) | 4.50" (114.3 mm) |
1/2" FNPT | 3.2 (45.7) | 3.35" (85.1 mm) |
3/4" Flaretek | 3.2 (45.7) | 5.52" (140.2 mm) |
3/4" PureBond fusible pipe | 3.2 (45.7) | 4.50" (114.3 mm) |
3/4" FNPT | 3.2 (45.7) | 5.25" (133.4 mm) |
Note:
- These valves are not field repairable. Contact Entegris for repair information.
Panel Mount Instructions
- Panel thickness must be within 0.12" (3.0 mm) to 0.38" (9.6 mm).
- Remove handle, insert valve into the panel.
- Tighten panel mounting nut 40 inch•lbs (4.5 N•m) torque, or 1/8-turn beyond hand tight.
Pressure range: | 29" Hg vacuum to 120 psig (980 mbar to 827.3 kPa) inlet and outlet at 73°F (23°C) 29" Hg vacuum to 60 psig (980 mbar to 414 kPa) inlet and outlet at 230°F (110°C) |
Temperature range: | 73° to 150°F (23° to 65°C), ambient and fluid 75°F (24°C) for ECTFE external components, ambient and fluid |
Materials: | All wetted surfaces are PFA and PTFE. Secondary containment is PFA, PVDF, PTFE, PEEK™ and carbon-fiber reinforced PEEK™. Mounting base is polyethylene. |
Successfully Opted for software Updates
-
1220-418-MLD
Safety lock out for use with 1/4" and 1/2" manual 1/4-turn Integra® valves and 1/4" manual Galtek® and 1/4" Galtek SG valves
Part Number | Inlet | Outlet | Options |
---|---|---|---|
D8-2Q-12F-6 | 3/4" Flaretek® | 3/4" Flaretek® | CPFA Flaretek® nut |
D8-2Q-12F-EC | 3/4" Flaretek® | 3/4" Flaretek® | ECTFE actuator with PFA nut |
D8-2Q-12F-II | 3/4" Flaretek® | 3/4" Flaretek® | PFA Flaretek® nut |
D8-2Q-12N-EC | 3/4" FNPT | 3/4" FNPT | ECTFE actuator |
D8-2Q-12P-EC | 3/4" PureBond® pipe | 3/4" PureBond® pipe | ECTFE actuator |
D8-2Q-12S1-3 | 3/4" Flaretek® "SpaceSaver" | 3/4" Flaretek® | PFA Flaretek® nut |
D8-2Q-12S1-6 | 3/4" Flaretek® "SpaceSaver" | 3/4" Flaretek® | CPFA Flaretek® nut |
D8-2Q-12S1-EC | 3/4" Flaretek® "SpaceSaver" | 3/4" Flaretek® | ECTFE actuator with PFA nut |
D8-2Q-12S1-II | 3/4" Flaretek® "SpaceSaver" | 3/4" Flaretek® | PFA FlareLock® II nut |
D8-2Q-8F-6 | 1/2" Flaretek® | 1/2" Flaretek® | CPFA Flaretek® nut |
D8-2Q-8F-EC | 1/2" Flaretek® | 1/2" Flaretek® | ECTFE actuator with PFA nut |
D8-2Q-8F-II | 1/2" Flaretek® | 1/2" Flaretek® | PFA FlareLock® II nut |
D8-2Q-8N-EC | 1/2" FNPT | 1/2" FNPT | ECTFE actuator |
D8-2Q-8P | 1/2" PureBond® pipe | 1/2" PureBond® pipe | N/A |
D8-2Q-8P-EC | 1/2" PureBond® pipe | 1/2" PureBond® pipe | ECTFE actuator |
D8-2Q-8S1-3 | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | PFA Flaretek® nut |
D8-2Q-8S1-6 | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | CPFA Flaretek® nut |
D8-2Q-8S1-EC | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | ECTFE actuator with PFA nut |
D8-2Q-8S1-II | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | PFA FlareLock® II nut |