Integra® Pneumatic Valves, 1/4" Orifice, 3-way
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
Ideal in point-of-use applications when low flow is required, including:
- High-purity, corrosive chemical handling
- Wet etch and clean (WEC) process chemicals
- Low volume bulk chemical delivery
- Chemical line sizes 1/2" or smaller
Specifications
Dimension Note:
Dimensions are the same regardless of body material (PVDF or ECTFE) or nut material (PVDF, PFA or CPFA).
Port Connection | Flow Factor Cv (Kv) | Dimension A |
1/4" FNPT | 0.90 (12.8) | 2.00" (50.8 mm) |
1/4" PureBond fusible pipe | 0.90 (12.8) | 4.00" (101.6 mm) |
3/8" Flaretek | 0.90 (12.8) | 4.12" (104.6 mm) |
1/2" Flaretek | 0.90 (12.8) | 4.28" (108.7 mm) |
Sensing Option Dimensional Information (shown in 4th drawing above)
A Remote Position Indication option is available to monitor valve open and closed positions electronically.
Note: To enable the remote position indication option you must special order the Omron sensor (-OM) on the valve. In addition, order Omron position sensor indicator (EE-SX770R or EE-SX770A), which are sold separately.
Panel Mount Instructions
- Panel thickness must be within .12" (3.0 mm) to .38" (9.5 mm).
- After installing on panel, tighten panel mounting nut to 20.0 inch•lbs. (2.25 N•m) torque, or 1/4-turn beyond hand tight.
Note: The Port 2 Pressure vs. Port 1 and 3 as a Function of Media Temperature graph is not applicable for valves with ECTFE external components. For ECTFE temperature rating refer to the Specification table below.
Function
- Valve can be used with either common inlet or common outlet.
- In unactuated position flow is through Ports 2 and 1.
- In actuated position flow is through Ports 2 and 3.
Pressure range: | 80 psig (552 kPa) at 70°F (21°C) media temperature 60 psig (414 kPa) at 212°F (100°C) media temperature 20 psig (138 kPa) at 300°F (150°C) media temperature 120 psig (827 kPa) proof pressure |
Temperature range: | 35° to 150°F (2° to 65°C), ambient 35° to 300°F (2° to 150°C), fluid 35° to 75°F (2° to 24°C) for ECTFE external components, ambient and fluid |
Pneumatic supply pressure: | 60 psig (413.7 kPa) minimum to 70 psig (482.6 kPa) maximum |
Pneumatic supply port: | 1/8" FNPT |
Materials: | All wetted parts are PFA. Exterior actuator parts are PVDF. Interior actuator parts are PVDF, stainless steel and Viton®. |
Note: Actual valve performance varies with pressure and temperature. Refer to actual ratings in performance charts.
Successfully Opted for software Updates
-
202-161
Repair kit for 1/4" Integra® pneumatic 3-way valves.
-
213-102-3W
Tool kit for 1/4" Integra® pneumatic 3-way valves.
*Note you must also order the 213-102-01 (1/4" Integra 2-way valve) tool kit. -
213-156
Tool - indicator stem trim fixture for all 1/4" or 1/2" Integra® pneumatic valves except 1/2" 2-way or 3-way high pressure (D8) valves.
Part Number | Port Connection | Options |
---|---|---|
202-83-01 | 1/4" FNPT | N/A |
202-84-01 | 1/4" PureBond® pipe | N/A |
202-84-01-EC | 1/4" PureBond® pipe | ECTFE actuator |
202-84-01-OM | 1/4" PureBond® pipe | Omron position sensor |
202-86-01 | 3/8" Flaretek® | PVDF Flaretek® nut |
202-86-01-6 | 3/8" Flaretek® | CPFA Flaretek® nut |
202-87-01-6 | 1/2" Flaretek® | CPFA Flaretek® nut |
202-87-01-EC | 1/2" Flaretek® | ECTFE actuator with PFA nut |
202-87-01-OM | 1/2" Flaretek® | Omron position sensor |