Magnaflo® Plug Valves, 1/4" and 3/8" Orifice, 1/4-turn
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
Appropriate for applications that use high-purity chemicals, slurry, solvents and deionized water, including:
- CMP slurry distribution
- Bulk chemical distribution
- Chemical sampling and process monitoring
Specifications
Dimension Note:
* (PVDF), -3 (PFA) or -6 (CPFA) nuts
| Part Number | Orifice | Flow Factor CV | Flow Factor KV | Port Connection | Dimension A |
BV4-4F* | 1/4" | .35 | 5.0 | 1/4" Flaretek® flared tube | 4.00" (101.6 mm) |
| BV4-4N | 1/4" | 1.5 | 21.4 | 1/4" FNPT | 2.71" (68.8 mm) |
| BV4-4P | 1/4" | 1.5 | 21.4 | 1/4" PureBond® fusible pipe | 4.27" (108.5 mm) |
| BV4-4Q | 1/4" | .35 | 5.0 | 1/4" Quikgrip® tube | 3.12" (79.2 mm) |
| BV4-6F* | 1/4" | 1.5 | 21.4 | 3/8" Flaretek® flared tube | 4.14" (105.2 mm) |
| BV4-6Q | 1/4" | 1.5 | 21.4 | 3/8" Quikgrip® tube | 3.12" (79.2 mm) |
| BV6-8F* | 3/8" | 4.0 | 57.1 | 1/2" Flaretek® flared tube | 4.30" (109.2 mm) |
| BV6-8N | 3/8" | 4.0 | 57.1 | 1/2" FNPT | 3.05" (77.5 mm) |
| BV6-8K | 3/8" | 4.0 | 57.1 | 1/2" PrimeLock® tube | 4.30" (109.2 mm) |
| BV6-8P | 3/8" | 4.0 | 57.1 | 1/2" PureBond® fusible pipe | 5.27" (133.9 mm) |
| BV6-8PS3-N1 | 3/8" | 4.0 | 57.1 | 1/2" Super 300 Type Pillar® fitting | 3.80" (96.5 mm) |
| BV6-8Q | 3/8" | 4.0 | 57.1 | 1/2" Quikgrip® tube | 3.12" (79.2 mm) |
| BV6-12F-01* | 3/8" | 4.0 | 57.1 | 3/4" Flaretek® flared tube | 4.38" (111.3 mm) |
1Pillar® nuts, inserts and gauge rings included as standard.
Panel Mount Instructions - Panel thickness must be within 0.10" (2.5 mm) to 0.25" (6.4 mm). To panel mount, the handle must be removed. Remove the screw holding the handle in place, then remove the handle. Remove the panel mount nut and insert valve into the panel. Thread the panel mount nut and insert valve into the panel. Thread the panel mount nut onto the valve and tighten nut to 40 inch•lbs (4.5 N•m) torque, or 1/8-turn beyond hand tight. Reinstall handle. Be careful not to over tighten handle screw.
| Maximum continuous use pressure: | 100 psig (689 kPa) at ambient temperature, media |
| Peak pressure for short durations (proof pressure for less than 24 hours): | 150 psig (1034 kPa) at ambient temperature, media |
| Maximum continuous temperature: | 200° F (93° C) at 25 psig (172 kPa), media |
| Peak temperature for short durations: | 400° F (204° C) at 10 psig (69 kPa), media |
| Materials: | All wetted parts are PFA and PTFE. Additional materials used for nonwetted parts include PVDF, PEEK™ and PTFE u-cup with Viton® energizer. |
Successfully Opted for software Updates
| Part Number | Port Connection | Nut Option |
|---|---|---|
| BV4-4F | 1/4" Flaretek® | PVDF Flaretek® nut |
| BV4-4F-3 | 1/4" Flaretek® | PFA Flaretek® nut |
| BV4-4F-6 | 1/4" Flaretek® | CPFA Flaretek® nut |
| BV4-4N | 1/4" FNPT | N/A |
| BV4-4P | 1/4" PureBond® pipe | N/A |
| BV4-4Q | 1/4" Quikgrip® | N/A |
| BV4-6F | 3/8" Flaretek® | PVDF Flaretek® nut |
| BV4-6F-3 | 3/8" Flaretek® | PFA Flaretek® nut |
| BV4-6F-6 | 3/8" Flaretek® | CPFA Flaretek® nut |
| BV4-6Q | 3/8" Quikgrip® | N/A |
| BV6-12F-01 | 3/4" Flaretek® | PVDF Flaretek® nut |
| BV6-12F-01-3 | 3/4" Flaretek® | PFA Flaretek® nut |
| BV6-12F-01-6 | 3/4" Flaretek® | CPFA Flaretek® nut |
| BV6-8F | 1/2" Flaretek® | PVDF Flaretek® nut |
| BV6-8F-3 | 1/2" Flaretek® | PFA Flaretek® nut |
| BV6-8F-6 | 1/2" Flaretek® | CPFA Flaretek® nut |
| BV6-8K | 1/2" PrimeLock® | N/A |
| BV6-8N | 1/2" FNPT | N/A |
| BV6-8P | 1/2" PureBond® pipe | N/A |
| BV6-8Q | 1/2" Quikgrip® | N/A |