IntelliGen® HMV20 Dispense System
Specify Your Part
Part Number:
Interested in an Entegris Product?
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact Us
Request a Quote
Quote Requested
Thank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
Top of page
Reference Materials
CAD
CAD drawings may be available for this product. Please use the Part Selector to select a part number to see if they are available.
Applications
- Medium-high viscosity (300 - 1,000 cP) POU photochemical dispense
Specifications
User-friendly confirmation tools:
- Dispense pressure profile compare (%)
- Dispense air detect volume (mL)
- Filtration averagel delta pressure (psi)
- Maximum fill pressure (psi)
- Total cycle time (sec)
| Materials | Wetted surfaces | PTFE, modified PTFE, Kalrez® |
| Dispense performance |
||
| Volume | 0.1–20.0 mL in 0.001 mL increments | |
| Dispense rate | 0.1–3.0 mL/sec in 0.01 mL/sec increments | |
| Repeatability | <0.03 mL 3 sigma | |
| Viscosity range* | 300–1,000 cP | |
| Maximum dispense design pressure** | 1 MPa (150 psi) | |
| Recharge performance |
Fill, filtration, vent, and purge rates | 0.1–3.0 mL/sec in 0.01 mL/sec increments |
| Vent frequency | Auto venting or 1–10,000 dispense cycles | |
| Mechanical | Connection type | Interchangeable Super 300 Type Pillar®, Super Type Pillar fittings |
| Vent tubing | OD: 6.35 mm (0.25"), 9.53 mm (0.375") | |
| ID: 3.97 mm (0.156"), 6.35 mm (.025") | ||
| Inlet and outlet tubing | OD: 9.53 mm (0.375") | |
| ID: 6.35 mm (0.25") | ||
| Filter | Optimizer® ST filter (OF) | |
| Inlet gas type | Regulated N2 or CDA | |
| Vacuum | - 68 kPa (20” Hg) | |
| Electrical | Current rating | 1.25 amp |
| Input voltage (system) | 24 VDC | |
| Serial communication | Dependent on interface module | |
| Parallel communication | Triggers and acknowledgments | |
| Dimension*** | Height Width Depth |
303.8 mm (11.96") 104.9 mm (4.13") 245.4 mm (9.66") |
| Weight | ~9.6 kg (21.2 lbs) | |
| Certifications | CE | |
| Environments (indoor use only) |
Altitude Ambient temperature**** |
<2,000 m 5° to 40°C (41° to 104°F) |
| *The pump is not limited to this viscosity range unless the dispense pressure goes beyond 150 psi. **Maximum pressure is a limit on the window of operation. ***Based on part number IGHMV20PKHP3 ****Dependent on tool. Proper ventilation may be needed to keep the temperature consistent. |
||
Successfully Opted for software Updates
Part Numbers
| Part Number | Fitting Type | Fitting Configuration | Inlet | Outlet | Vent | Cable Length | Connector |
|---|---|---|---|---|---|---|---|
| IGHMV20PHKP3 | 3/8" Super Type Pillar® | Straight | 3/8" | 3/8" | 3/8" | 1.0 m | D-Sub 25 pin |
| IGHMV20PS331E | 3/8" Super 300 Type Pillar® | Elbow | 3/8" | 3/8" | 1/4" | 0.1 m | D-Sub 15 pin, 3 lines |
| IGHMV20PS331S | 3/8" Super 300 Type Pillar® | Straight | 3/8" | 3/8" | 1/4" | 0.1 m | D-Sub 15 pin, 3 lines |
| IGHMV20PS333S | 3/8" Super 300 Type Pillar® | Straight | 3/8" | 3/8" | 3/8" | 3.0 m | D-Sub 15 pin |