Cynergy® Clamp-to-Flaretek® Adapters
Specify Your Part
Part Number:
Interested in an Entegris Product?
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact Us
Request a Quote
Quote Requested
Thank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
Top of page
Reference Materials
CAD
CAD drawings may be available for this product. Please use the Part Selector to select a part number to see if they are available.
Applications
- Utility line and process applications
- Ideal in bioprocessing, biotechnology and fine chemicals applications using ultrapure water, corrosive chemistries and biotechniques
Specifications
| Part Number | Leg 1 | Leg 2 | Dimensions | |||
| A | B | C | D | |||
| SA4-4FN-1 | 1/4" Cynergy clamp | 1/4" Flaretek | 1.84" (46.7 mm) | 0.250" (6.35 mm) | 0.984" (24.99 mm) | 0.13" (3.3 mm) |
| SA4-4FN-II | 1/4" Cynergy clamp | 1/4" Flaretek | 1.86" (47.2 mm) | 0.250" (6.35 mm) | 0.984" (24.99 mm) | 0.13" (3.3 mm) |
| SA4-6FN-1 | 1/4" Cynergy clamp | 3/8" Flaretek | 1.96" (49.8 mm) | 0.250" (6.35 mm) | 0.984" (24.99 mm) | 0.25" (6.4 mm) |
| SA4-6FN-II | 1/4" Cynergy clamp | 3/8" Flaretek | 2.03" (51.6 mm) | 0.250" (6.35 mm) | 0.984" (24.99 mm) | 0.25" (6.4 mm) |
| SA8-8FN-1 | 1/2" Cynergy clamp | 1/2" Flaretek | 2.06" (52.3 mm) | 0.370" (9.40 mm) | 0.984" (24.99 mm) | 0.38" (9.7 mm) |
| SA8-8FN-II | 1/2" Cynergy clamp | 1/2" Flaretek | 2.07" (52.6 mm) | 0.370" (9.40 mm) | 0.984" (24.99 mm) | 0.38" (9.7 mm) |
| SA12-12FN-1 | 3/4" Cynergy clamp | 3/4" Flaretek | 2.36" (59.9 mm) | 0.620" (15.75 mm) | 0.984" (24.99 mm) | 0.63" (16.0 mm) |
| SA12-12FN-II | 3/4" Cynergy clamp | 3/4" Flaretek | 2.25" (57.2 mm) | 0.620" (15.75 mm) | 0.984" (24.99 mm) | 0.63" (16.0 mm) |
| SA16-12FN-1 | 1" Cynergy clamp | 3/4" Flaretek | 2.36" (59.9 mm) | 0.856" (21.74 mm) | 1.984" (50.39 mm) | 0.63" (16.0 mm) |
| SA16-12FN-II | 1" Cynergy clamp | 3/4" Flaretek | 2.37" (60.2 mm) | 0.856" (21.74 mm) | 1.984" (50.39 mm) | 0.63" (16.0 mm) |
| SA16-16FN-1 | 1" Cynergy clamp | 1" Flaretek | 2.63" (66.8 mm) | 0.856" (21.74 mm) | 1.984" (50.39 mm) | 0.87" (22.1 mm) |
| SA16-16FN-II | 1" Cynergy clamp | 1" Flaretek | 2.76" (70.1 mm) | 0.856" (21.74 mm) | 1.984" (50.39 mm) | 0.87" (22.1 mm) |
| SA24-16FN-1 | 1 1/2" Cynergy clamp | 1" Flaretek | 2.63" (66.8 mm) | 1.356" (34.44 mm) | 1.984" (50.39 mm) | 0.87" (22.1 mm) |
| SA24-16FN-II | 1 1/2" Cynergy clamp | 1" Flaretek | 2.77" (70.4 mm) | 1.356" (34.44 mm) | 1.984" (50.39 mm) | 0.87" (22.1 mm) |
Product and Material Lot Traceability
Cynergy products made with Teflon® PFA are coded with a lot number. This nondestructive, noncontaminating serial marking allows 100% traceability to a specific material lot, production date and production inspection record.
Injection molded products have a unique two-digit code molded into the body. This code changes with every production lot (see second drawing above).
Teflon® is a trademark of The Chemours Company FC, LLC used under license by Entegris, Inc.
Autoclavability
Disassemble valves and unclamp connections before autoclaving. 124°C (255°F) is the maximum autoclave temperature.
Vacuum
Full static vacuum capability at 149°C (300°F).
Materials
All Cynergy products are made from specially chosen resins that meet industry needs for handling highly corrosive environments, saturated steam and cleaning chemicals.
All internal wetted surfaces are made from resins that comply with FDA regulation 21 CFR 177.1550 (perfluorocarbon resins as articles or components of articles intended for use in contact with food). These resins also comply with the criteria in 3-A Standards for Multiple-use Plastic Materials Used as Product Contact Surfaces for Dairy Equipment, Number 20-17, and USP Class VI Biologics Criteria.
External surfaces may also include PEEK and PES materials, high performance, FDA approved engineering grade polymers that are well suited to meet your application requirements.
For complete chemical compatibility and mechanical capabilities, refer to Section 1 of the Cynergy System Technical Guide.
Gasket and Clamp Recommendations
Laboratory testing of Cynergy clamp fittings shows performance reliability is dependent on the type of clamp and gasket used. Entegris strongly recommends the use of Tri-Clamp® two-piece clamps for 1/4", 1/2" and 3/4" sizes, and Tri-Clamp three-piece clamps for 1", 1 1/2" and 2" sizes. Entegris also recommends the use of EPDM sanitary gaskets by Tri-Clover® or Newman with our Cynergy clamp fittings. In-house testing has been performed on other high performance gasket materials with favorable results. Contact your local Entegris distributor or Entegris, Inc. for a recommendation.
| Cynergy Clamp Connection Size | Rubber Fab Tuf-Flex® PTFE/EPDM Gasket Number | Entegris Part Number for Tuf-Flex Gasket | Tri-Clover EPDM Gasket Part Number | Entegris EPDM Gasket Part Number | Tri-Clamp Clamp Part Number | Entegris Part Number for Tri-Clamp | Clamp Torque in•lbs (N•m) |
| 1/4" | — | — | 0-42MP-E-1/41 | 1333-022 | 13MHHS-3/4-S | 01-008141 | 15 (1.7) |
| 1/2" | A42MPGR-TF-050-E | 01-1014718 | 42MP-E-1/2 | 01-008136 | 13MHHS-3/4-S | 01-008141 | 15 (1.7) |
| 3/4" | A42MPGR-TF-075-E | 01-1014351 | 42MP-E-3/4 | 01-008137 | 13MHHS-3/4-S | 01-008141 | 15 (1.7) |
| 1" | A40MPGR-TF-100-E | 01-034815 | 40MP-E-1 | 01-008138 | 13MHHS-1 1/2-S | 01-008142 | 25 (2.8) |
| 1 1/2" | A40MPGR-TF-150-E | 01-034816 | 40MP-E-1 1/2 | 01-008139 | 13MHHS-1 1/2-S | 01-008142 | 25 (2.8) |
| 2" | A40MPGR-TF-200-E | 01-034817 | 40MP-E-2 | 01-008140 | 13MHHS-2-S | 01-008143 | 25 (2.8) |
1Newman EPDM Gasket Part Number
Successfully Opted for software Updates
Published Feb 6, 2020
Instruction Sheet
Cynergy® Clamp-to-FlareLock® II Adapter Assembly Procedures
376.2 kB
Part Numbers
| Part Number | Leg 1 | Leg 2 | Nut Option |
|---|---|---|---|
| SA12-12FN-3 | 3/4" Cynergy® clamp | 3/4" Flaretek® | PFA Flaretek® nut |
| SA12-12FN-6 | 3/4" Cynergy® clamp | 3/4" Flaretek® | CPFA Flaretek® nut |
| SA16-12FN-1 | 1" Cynergy® clamp | 3/4" Flaretek® | PVDF Flaretek® nut |
| SA16-12FN-6 | 1" Cynergy® clamp | 3/4" Flaretek® | CPFA Flaretek® nut |
| SA16-12FN-II | 1" Cynergy® clamp | 3/4" Flaretek® | PFA FlareLock® II nut |
| SA16-16FN-1 | 1" Cynergy® clamp | 1" Flaretek® | PVDF Flaretek® nut |
| SA16-16FN-6 | 1" Cynergy® clamp | 1" Flaretek® | CPFA Flaretek® nut |
| SA24-16FN-6 | 1 1/2" Cynergy® clamp | 1" Flaretek® | CPFA Flaretek® nut |
| SA4-4FN-1 | 1/4" Cynergy® clamp | 1/4" Flaretek® | PVDF Flaretek® nut |
| SA4-4FN-6 | 1/4" Cynergy® clamp | 1/4" Flaretek® | CPFA Flaretek® nut |
| SA4-4FN-II | 1/4" Cynergy® clamp | 1/4" Flaretek® | PFA FlareLock® II nut |
| SA4-6FN-6 | 1/4" Cynergy® clamp | 3/8" Flaretek® | CPFA Flaretek® nut |
| SA8-8FN-1 | 1/2" Cynergy® clamp | 1/2" Flaretek® | PVDF Flaretek® nut |
| SA8-8FN-3 | 1/2" Cynergy® clamp | 1/2" Flaretek® | PFA Flaretek® nut |
| SA8-8FN-6 | 1/2" Cynergy® clamp | 1/2" Flaretek® | CPFA Flaretek® nut |