Quikgrip® Tee Adapter, MNPT Run
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
- Corrosive environments, including highly corrosive vapor applications
- Corrosive applications in the chemical industry
- Corrosive, high purity Laboratory applications
Specifications
Part Number | Leg 1 | Leg 2 | Leg 3 | Orifice | Dimensions | Hex | ||
A | B | C | ||||||
RT4-2GN-1 | 1/4" Quikgrip | 1/4" Quikgrip | 1/8" MNPT | 0.19" (4.8 mm) | 2.23" (56.6 mm) | 1.36" (34.5 mm) | 1.36" (34.5 mm) | 1/2" |
RT4-4GN-1 | 1/4" Quikgrip | 1/4" Quikgrip | 1/4" MNPT | 0.19" (4.8 mm) | 2.23" (56.6 mm) | 1.36" (34.5 mm) | 1.36" (34.5 mm) | 1/2" |
RT6-4GN-1 | 3/8" Quikgrip | 3/8" Quikgrip | 1/4" MNPT | 0.30" (7.6 mm) | 2.73" (69.3 mm) | 1.66" (42.2 mm) | 1.66" (42.2 mm) | 11/16" |
RT8-4GN-1 | 1/2" Quikgrip | 1/2" Quikgrip | 1/4" MNPT | 0.29" (7.4 mm) | 2.81" (71.4 mm) | 1.74" (44.2 mm) | 1.74" (44.2 mm) | 13/16" |
RT8-8GN-1 | 1/2" Quikgrip | 1/2" Quikgrip | 1/2" MNPT | 0.43" (10.9 mm) | 2.81" (71.4 mm) | 1.74" (44.2 mm) | 1.74" (44.2 mm) | 13/16" |
RT12-12GN-1 | 3/4" Quikgrip | 3/4" Quikgrip | 3/4" MNPT | 0.67" (17.0 mm) | 3.50" (88.9 mm) | 2.13" (54.1 mm) | 2.13" (54.1 mm) | 1 1/16" |
Easy Assembly with No Special Tools
Note:
- All pressure ratings at various temperatures are based on actual test data using Entegris test standards and protocols.
Pipe Thread (NPT) Assembly Procedure
- Apply PTFE tape or paste sealant to MNPT threads starting one thread back from end of fitting.
- When using tape, tightly wrap in direction of threads to conform tape to thread shape.
a. Use 3 1/2 to 4 wraps of tape when assembling PFA threads to PFA material.
b. Use 4 to 5 wraps of tape when assembling PFA threads to a material other than PFA. - Thread the fitting onto the mating component until hand tight.
- Using a wrench, tighten fitting about 4 turns past hand tight.
PTFE tape = 1/2" wide for all NPT fittings
Note: PTFE tape is not recommended for use in a gaseous application.
Torque (in•lbs x .11298 = newton•m)
In•lbs | Newton•m | |
1/16" | 5.0 | 0.57 |
1/8" | 7.0 | 0.79 |
1/4" | 16 | 1.81 |
3/8" | 23 | 2.60 |
1/2" | 30 | 3.39 |
3/4" | 54 | 6.10 |
1" | 78 | 8.81 |
Successfully Opted for software Updates