Integra® Manual Valves, 1/4" Orifice, 2-way, 1/4-turn
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
Ideal in point-of-use applications when low flow is required, including:
- High-purity, corrosive chemical handling
- Wet etch and clean (WEC) process chemicals
- Low volume bulk chemical delivery
- Chemical line sizes 1/2" or smaller
Specifications
Dimension Note:
Dimensions are the same regardless of body material (PVDF or ECTFE) or nut material (PVDF, PFA or CPFA).
| Port Connection | Flow Factor Cv (Kv) |
Dimensions | ||
| A | B | C | ||
| 1/4" Flaretek | 0.24 (3.4) | 3.12" (79.2 mm) | 0.49" (12.4 mm) | 3.30" (83.8 mm) |
| 1/4" PureBond fusible pipe | 0.90 (12.8) | 4.00" (101.6 mm) | 0.57" (14.5 mm) | 3.39" (86.1 mm) |
| 1/4" FNPT | 0.90 (12.8) | 2.00" (50.8 mm) | 0.57" (14.5 mm) | 3.39" (86.1 mm) |
| 3/8" Flaretek | 0.90 (12.8) | 4.12" (104.6 mm) | 0.57" (14.5 mm) | 3.39" (86.1 mm) |
| 1/2" Flaretek | 0.90 (12.8) | 4.28" (108.7 mm) | 0.57" (14.5 mm) | 3.39" (86.1 mm) |
Note: The Inlet Pressure vs. Outlet Pressure as a Function of Media Temperature graph is not applicable for valves with ECTFE external components. For ECTFE temperature rating refer to the Specification table below.
| Pressure range: | 29" Hg vacuum (980 mbar) to 100 psig (689.5 kPa) |
| Temperature range: | 35° to 150°F (2° to 65°C), ambient 35° to 300°F (2° to 150°C), fluid 35° to 75°F (2° to 24°C) for ECTFE external components, ambient and fluid |
| Materials: | All wetted parts are PFA. Exterior actuator parts are PVDF. Interior actuator parts are PVDF, stainless steel and Viton®. |
Note: Actual valve performance varies with pressure and temperature. Refer to actual ratings in performance charts.
CAUTION!
The valve port-to-port seal travel adjustment nut is set at the factory. DO NOT move the adjustment nut on the valve. If altered in the field, use the following procedure to properly reset the nut.
- Close the valve and connect 100 PSIG air pressure to the outlet port.
- Turn the adjustment nut clockwise until leakage stops from the inlet port.
- Turn the adjustment nut an additional 1/8 turn.
Successfully Opted for software Updates
-
I4-MB-01
Mounting base for use with 1/4" 2-way Integra® valves except valves with 1/4" Flaretek® port connections
—
-
1220-418-MLD
Safety lock out for use with 1/4" and 1/2" manual 1/4-turn Integra® valves and 1/4" manual Galtek® and 1/4" Galtek SG valves
—
-
201-71
Repair kit for 1/4" Integra® manual 1/4-turn or samling valves
—
-
213-102-01
Tool kit for 1/4" Integra® 2-way or sampling valves.
—
| Part Number | Inlet | Outlet | Options |
|---|---|---|---|
| 201-43-01 | 1/4" FNPT | 1/4" FNPT | N/A |
| 201-44-01 | 1/4" PureBond® pipe | 1/4" PureBond® pipe | N/A |
| 201-44-01-EC | 1/4" PureBond® pipe | 1/4" PureBond® pipe | ECTFE actuator |
| 201-46-01 | 3/8" Flaretek® | 3/8" Flaretek® | PVDF Flaretek® nut |
| 201-46-01-3 | 3/8" Flaretek® | 3/8" Flaretek® | PFA Flaretek® nut |
| 201-46-01-EC | 3/8" Flaretek® | 3/8" Flaretek® | ECTFE actuator with PFA nut |
| 201-46-SI-01-3 | 3/8" Flaretek® "SpaceSaver" | 3/8" Flaretek® | PFA Flaretek® nut |
| 201-46-SI-01-6 | 3/8" Flaretek® "SpaceSaver" | 3/8" Flaretek® | CPFA Flaretek® nut |
| 201-46-SI-01-EC | 3/8" Flaretek® "SpaceSaver" | 3/8" Flaretek® | ECTFE actuator with PFA nut |
| 201-46-SO-01 | 3/8" Flaretek® | 3/8" Flaretek® "SpaceSaver" | PVDF Flaretek® nut |
| 201-46-SO-01-3 | 3/8" Flaretek® | 3/8" Flaretek® "SpaceSaver" | PFA Flaretek® nut |
| 201-46-SO-01-6 | 3/8" Flaretek® | 3/8" Flaretek® "SpaceSaver" | CPFA Flaretek® nut |
| 201-46-SO-01-EC | 3/8" Flaretek® | 3/8" Flaretek® "SpaceSaver" | ECTFE actuator with PFA nut |
| 201-47-01 | 1/2" Flaretek® | 1/2" Flaretek® | PVDF Flaretek® nut |
| 201-47-01-3 | 1/2" Flaretek® | 1/2" Flaretek® | PFA Flaretek® nut |
| 201-47-01-6 | 1/2" Flaretek® | 1/2" Flaretek® | CPFA Flaretek® nut |
| 201-47-SI-01 | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | PVDF Flaretek® nut |
| 201-47-SI-01-3 | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | PFA Flaretek® nut |
| 201-47-SI-01-6 | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | CPFA Flaretek® nut |
| 201-47-SI-01-EC | 1/2" Flaretek® "SpaceSaver" | 1/2" Flaretek® | ECTFE actuator with PFA nut |
| 201-47-SO-01 | 1/2" Flaretek® | 1/2" Flaretek® "SpaceSaver" | PVDF Flaretek® nut |
| 201-47-SO-01-3 | 1/2" Flaretek® | 1/2" Flaretek® "SpaceSaver" | PFA Flaretek® nut |
| 201-47-SO-01-6 | 1/2" Flaretek® | 1/2" Flaretek® "SpaceSaver" | CPFA Flaretek® nut |
| 201-47-SO-01-EC | 1/2" Flaretek® | 1/2" Flaretek® "SpaceSaver" | ECTFE actuator with PFA nut |
| 201-96-01 | 1/4" Flaretek® | 1/4" Flaretek® | PVDF Flaretek® nut |
| 201-96-01-3 | 1/4" Flaretek® | 1/4" Flaretek® | PFA Flaretek® nut |
| 201-96-01-6 | 1/4" Flaretek® | 1/4" Flaretek® | CPFA Flaretek® nut |
| 201-96-01-EC | 1/4" Flaretek® | 1/4" Flaretek® | ECTFE actuator with PFA nut |
| 201-96-SI-01 | 1/4" Flaretek® "SpaceSaver" | 1/4" Flaretek® | PVDF Flaretek® nut |
| 201-96-SI-01-3 | 1/4" Flaretek® "SpaceSaver" | 1/4" Flaretek® | PFA Flaretek® nut |
| 201-96-SI-01-6 | 1/4" Flaretek® "SpaceSaver" | 1/4" Flaretek® | CPFA Flaretek® nut |
| 201-96-SI-01-EC | 1/4" Flaretek® "SpaceSaver" | 1/4" Flaretek® | ECTFE actuator with PFA nut |
| 201-96-SO-01 | 1/4" Flaretek® | 1/4" Flaretek® "SpaceSaver" | PVDF Flaretek® nut |
| 201-96-SO-01-3 | 1/4" Flaretek® | 1/4" Flaretek® "SpaceSaver" | PFA Flaretek® nut |
| 201-96-SO-01-EC | 1/4" Flaretek® | 1/4" Flaretek® "SpaceSaver" | ECTFE actuator with PFA nut |