PDMPak® Bottles
Specify Your Part
Part Number:
Interested in an Entegris Product?
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact Us
Request a Quote
Quote Requested
Thank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
Top of page
Reference Materials
This video shows how to use Entegris' NA-47 tear tab removal tool on a SmartCap or IntelliCap closure for our NOWPak bottle system. Runtime: 00:16
CAD
CAD drawings may be available for this product. Please use the Part Selector to select a part number to see if they are available.
Applications
- Photolithography materials
- High-viscosity materials
- Copper plating additives
- Materials requiring high-purity packaging or materials that are sensitive to environmental exposure
Specifications
| Rated capacity | PK-01-A4-T420-1 | 1 liter | ||
| PK-04-A4-T420-1 | 4 liter | |||
| DO NOT overfill. There is a designed overhead capacity to accommodate the dispense system. The actual capacity should be used when filling the PDMPak bottle system to avoid process problems and potential overflows. | ||||
| Nominal weight of assembly (including temporary cap*) | 1-liter | 0.29 kg (0.63 lb) | ||
| 4-liter | 0.76 kg (1.68 lb) | |||
| UV protection | Less than 0.1% light transmittance at 190-400 nm wavelength | |||
| United nations classification | A combination package with Entegris specified shipping box (Certified UN4G/Y – 4-liter size only) | |||
| Overpack neck thread type | Modified 63 mm buttress thread. 4.24 mm (0.167”) pitch | |||
| Pressure dispense rating | The PDMPak bottle system is a pressure rated vessel. | |||
| Maximum operating pressure: 1 atm gauge pressure (14.7psig, 101.4 kPa) | ||||
| Country of manufacture | USA | |||
| Materials of construction | Overpack | Blowmolded HDPE | ||
| Chime | Injection molded HDPE | |||
| Liner | PTFE film | |||
| Fitment | Injection molded natural virgin PFA | |||
| Retainer | Injection molded natural virgin HDPE | |||
| Temporary cap | Injection molded LDPE – red pigmented | |||
| Manufacturing standards | Fabricated and tested in a Class 5 Cleanroom as per International Standard ISO 14644-1:** Cleanrooms and associated controlled environments – Part 1: Classification of air cleanliness. | |||
| Film and seal defect detection | Light table visual inspection | |||
| Liner leak detection*** | Pressure decay tested | |||
| Liner integrity verification**** | Pressurized burst tested | |||
| Weld tensile strength tested | ||||
| Particle count verification | Particle tested with ultra-pure DI water | |||
| Cleanliness | PDMPak contains a particle-certified liner | |||
| Product is not to exceed 96 particles per mL at ≥60 nm in ultrapure DI water | ||||
| Product is not to exceed 36 particles per mL at ≥80 nm in ultrapure DI water | ||||
| Product is not to exceed 14 particles per mL at ≥100 nm in ultrapure DI water. | ||||
| A Certificate of Analysis stating lot specific particle count data is available for each shipment of product. | ||||
| Extractable trace elements | Product is not to exceed 2 ppb (parts per billion) total of extractable Trace Elements listed utilizing 5% Nitric acid. Trace Elements reported are: Ag, Al, As, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, In, K, Li, Mg, Mn, Na, Ni, Pb, Si, Sn, Sr, Ti, V, W, and Zn. A Certificate of Analysis stating lot specific Trace Element data is available for each shipment of product. | |||
| Packaging | PDMPak bottles are double wrapped in a polyethylene bag and closed with a cable tie. | |||
| The double-wrapped PDMPak bottles are placed into a shipping box made of corrugated fiberboard. | ||||
| Shipping information | 1-liter size | 4-liter size | ||
| Size box quantity | 30 | 6 | ||
| Skid quantity | 450 (15 boxes of 30) | 150 (25 boxes of 6) | ||
| Box dimension (mm) | 851 mm x 343 mm x 324 mm (33.5" x 13.5" x 12.8") | 660 mm x 457 mm x 356 mm (26" x 18" x 14") | ||
| *A temporary cap weights 7 g (0.007 kg) | ||||
| **ISO standard certification is kept up to date as necessary to remain current and effective to be able to demonstrate compliance with up-to-date ISO requirements | ||||
| ***Detection = every liner | ||||
| ****Verification = statistical sampling | ||||
Successfully Opted for software Updates
Published Aug 1, 2024
Manual and Guide
ErgoNOW™ Connector: For Use With NOWPak® Liner-Based Bottle System
3.6 MB
Using the SmartCap™ and IntelliCap™ Tear Tab Removal Tool
This video shows how to use Entegris' NA-47 tear tab removal tool on a SmartCap or IntelliCap closure for our NOWPak bottle system. Runtime: 00:16
Part Numbers
| Part Number | Size |
|---|---|
| PK-01-A4-T420-1 | 1 liter |
| PK-04-A4-T420-1 | 4 liters |