Panel thickness must be within 0.10" (2.5 mm) to 0.25" (6.4 mm). To panel mount, the handle must be removed. Remove the screw holding the handle in place. Remove the handle. To install valve, remove the panel mount nut and insert valve into the panel. Thread the panel mount nut onto the valve and tighten nut to 40 inch•lbs (4.5N•m) torque, or 1/8-turn beyond hand tight. Reinstall handle. Be careful not to over tighten handle screw.
Maximum continuous use pressure:
100 psig (689 kPa) @ 73°F (23°C) media temperature
Peak pressure for short durations
(proof pressure for less than 24 hours):
150 psig (1034 kPa) @ 73°F (23°C) media temperature
Maximum continuous use temperature:
300° F (149°C) at media pressures up to 50 psig (345 kPa)
Actuation cycle life:
All wetted parts are PFA and PTFE. Nonwetted parts are Viton®, PVDF and PTFE-filled PVDF.