Linegard™ GIGAX-FP Filters
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
- High-flow, noncritical applications
- For filtration of compressed dry air and inert gases
- Suitable for general nitrogen and compressed air
- Facility entrances, bulkheads, and hook up
Specifications
| Materials | Membrane: | PTFE | |
| Supports: | Polypropylene | ||
| O-ring | Encapsulated fluoroelastomer (E-FKM)* | ||
| Housing: | 316L Stainless Steel | ||
| Surface finish interior | 25 µin Ra | ||
| Removal rating | >0.0015 μm (in gas) | ||
| Maximum operating conditions | Maximum inlet pressure: | 1.2 MPa (12 bar, 174 psig) @ RT | |
| Maximum forward differential pressure: | 0.41 MPa (4.1 bar, 59 psid @ RT | ||
| Maximum reverse differential pressure: | 0.05 MPa (0.5 bar, 7 psid) @ RT | ||
| Maximum operating temperature: | 60°C (140°F) | ||
| Helium leak rating | 1 × 10-10 Pa•m3/sec | ||
| Recommended gases | Compressed dry air (CDA) and inert gases | ||
| Warranty | 1 year | ||
| *The O-ring material for butt weld (LGGXFPBW6) is EPDM. Please contact Entegris for compatiblity with other gases. |
|||
Successfully Opted for software Updates