ProcessGard® DSP Filter
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
- Industry: Data Storage
- Process: Substrate - Polishing
- Chemical: Slurry
- Installation Point: Point of Tool, Point of Dispense
Specifications
Materials: | Media: Polypropylene |
Support, core, sleeve: Polypropylene | |
O-ring: EPDM, FKM, E-FKM | |
Retention rating: | 0.1, 0.2, 0.5, 1.0, 2.5, 5.0 μm |
Maximum operating conditions: | Maximum forward differential pressure: 0.4 MPa (4.0 bar, 58 psi) @ 20°C (68°F) |
Maximum reverse differential pressure: 0.25 MPa (2.5 bar, 36 psi) @ 20°C (68°F) | |
Maximum operating temperature: 80°C (176°F) | |
Cartridge connections: | Code 0 (double AS568-222), Code E (AS568-219 inner o-ring), Code F (gasket) |
Successfully Opted for software Updates
Part Number | Form Factor | Length | Retention Rating | O-ring | Connection |
---|---|---|---|---|---|
DSP01010E1 | Cartridge | 10" | 0.1 µm | EPDM | Code 0 |
DSP01010V1 | Cartridge | 10" | 0.1 µm | FKM | Code 0 |
DSP01E10E1 | Cartridge | 10" | 0.1 µm | EPDM | Code E |
DSP02010E1 | Cartridge | 10" | 0.2 µm | EPDM | Code 0 |
DSP05010E1 | Cartridge | 10" | 0.5 µm | EPDM | Code 0 |
DSP05020E1 | Cartridge | 20" | 0.5 µm | EPDM | Code 0 |
DSP10010E1 | Cartridge | 10" | 1 µm | EPDM | Code 0 |
DSP10010V1 | Cartridge | 10" | 1 µm | FKM | Code 0 |
DSP10020E1 | Cartridge | 20" | 1 µm | EPDM | Code 0 |
DSP25010E1 | Cartridge | 10" | 2.5 µm | EPDM | Code 0 |
DSP25010V1 | Cartridge | 10" | 2.5 µm | FKM | Code 0 |
DSP25020E1 | Cartridge | 20" | 2.5 µm | EPDM | Code 0 |
DSP50010E1 | Cartridge | 10" | 5.0 µm | EPDM | Code 0 |
DSPD001L3F | 5" Capsule | 5" | 0.1 µm | N/A | 3/8" flare |
DSPD001S2C | Standard PP Capsule | 2.5" | 0.1 µm | N/A | 1/4" inlet/outlet, compression seal |
DSPD002S2C | Standard PP Capsule | 2.5" | 0.2 µm | N/A | 1/4" inlet/outlet, compression seal |
DSPD010S2C | Standard PP Capsule | 2.5" | 1 µm | N/A | 1/4" inlet/outlet, compression seal |
DSPD025L3F | 5" Capsule | 5" | 2.5 µm | N/A | 3/8" flare |