ProcessGard® PDP Filters
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
- Industry: Flat Panel Display, Chemical Manufacturing
- Process: Bulk Chemical
- Chemical: Color Resist
- Installation Point: Pre Filter, Bulk
Specifications
Cartridge | ||
---|---|---|
Materials: | Media | Polypropylene: 0.2, 0.4, 0.5 µm |
Polypropylene/nylon: 1.5 µm | ||
Supports, core, sleeve | Polypropylene | |
Sealing | EPDM, FKM, E-FKM | |
Nominal retention rating: | 0.2, 0.4, 0.5, 1.5 µm | |
Operating conditions: | Maximum forward differential pressure | 0.4 MPa (4.0 bar; 58 psid) @ 20°C (68°F) |
Maximum reverse differential pressure | 0.25 MPa (2.5 bar; 36 psid) @ 20°C (68°F) | |
Maximum operating temperature | 80°C (176°F) | |
Cartridge connections: | Code 0, Code 5 | O-ring AS568-222 |
Code 7 | O-ring AS568-226 | |
Code F | Gasket (EPDM or FKM only) |
Disposable | ||
---|---|---|
Materials: | Media | Polypropylene: 0.2, 0.4, 0.5 µm |
Polypropylene/nylon: 1.5 µm | ||
Supports, core, sleeve | Polypropylene | |
Shell | Polypropylene | |
Nominal retention rating: | 0.2, 0.4, 0.5, 1.5 µm | |
Operating conditions: | Maximum forward differential pressure | 0.4 MPa (4.0 bar; 58 psid) @ 20°C (68°F) |
Maximum reverse differential pressure | 0.25 MPa (2.5 bar; 36 psid) @ 20°C (68°F) | |
Maximum operating temperature | 60°C (140°F) | |
Fittings | Inlet/outlet | Compression seal, NPT, flare |
Vent/drain | Compression seal, NPT, flare |
Successfully Opted for software Updates
Part Number | Maximum Temperature | Membrane/Media | Form Factor | Length | Retention Rating | O-ring | Connection |
---|---|---|---|---|---|---|---|
PGPDN003DS2N | 60°C (140°F) | PP | Capsule | 2.5" | 0.3 µm | N/A | 1/4" MNPT fitting |
PGPN03D02T1 | 80°C (176°F) | PP | Cartridge | 20" | 0.3 µm | E-FKM | Code 0 |
PGPN05A01E1 | 80°C (176°F) | PP | Cartridge | 10" | 0.5 µm | EPDM | Code 0 |