Purasol™ LS2 Solvent Purifier
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
- Photolithography solvents
- Raw materials and intermediates (resin, polymer solutions, etc.) used in photochemical manufacturing
Specifications
Length | A | B |
10" | 262.3 mm (10.33") | 245.0 mm (9.65") |
20" | 506.5 mm (19.94") | 489.2 mm (19.26") |
Materials | Membrane | Polytetrafluoroethylene (PTFE) |
Supports, core sleeve, shell | High-density polyethylene (HDPE) | |
O-ring (cartridges) | E-FKM | |
Surface area (X-section) | Cartridges | 10" 1.1 m2 (11.8 ft2) |
20" 2.2 m2 (23.7 ft2) | ||
Disposable | 0.18 m2 (1.9 ft2) | |
Fitting type | Disposable | 1/4" compression fitting |
Operating conditions | Maximum forward differential pressure | 0.24 MPa (2.4 bar, 35 psi) @ 25°C (77°F) |
Maximum reverse differential pressure | 0.24 MPa (2.4 bar, 35 psi) @ 25°C (77°F) | |
Maximum operating temperature | 60°C (140°F) | |
Flow conditions | Initial flow rate @19.6 kPa (10" and 20") @58.8 kPa (Disposable) |
10’’: 2.5 (L/min) ≤ PLTG01 ≤7 (L/min) |
20”: 5.2 (L/min) ≤ PLTG02 ≤15 (L/min) | ||
Disposable: 1.7 (L/min) ≤ PLTG0S ≤3.6 (L/min) |
Successfully Opted for software Updates
Part Number | Form Factor | Length |
---|---|---|
PLTG01P2T01 | Cartridge | 10" |
PLTG02P2T01 | Cartridge | 20" |
PLTG0S1S121 | Disposable | 4.5" |