ProcessGard® PES/PP/PS Filters
To discuss your specific needs, contact your local Entegris representative.
Don't have an Entegris representative?
Contact UsThank you for requesting a quote. Someone from Entegris will contact you shortly.
Your quote number is {0}.
- Industry: Data Storage (Facilities, HDD Assembly - Cleaning, HGA/HSA Assembly - Cleaning, Cleaning)
- Chemical: Dilute Acids, Dilute Bases, Resist Stripper, Solvent, DI Water
- Installation Point: Point-of-Tool, Point-of-Dispense
Specifications
PES Cartridge: | |
---|---|
Materials: | Membrane: Hydrophilic polyethersulfone |
Supports, core, sleeve: Polypropylene | |
O-rings (AS568-222): EPDM, fluoroelastomer, E-FKM (encapsulated fluoroelastomer) | |
Dimensions (nominal): | Length: 263 mm (10.35”) |
Diameter: 70 mm (2.75”) | |
Operating conditions: | Maximum forward differential pressure: 0.5 MPa (5.0 bar, 73 psi) @20°C (68°F); 0.25 MPa(2.5 bar, 36 psi) @ 50°C (122°F); 0.2 MPa (2.0 bar, 29 psi) @ 90°C (194°F) |
Maximum reverse differential pressure: 0.3 MPa (3.0 bar, 44 psi) @ 20°C (68°F) | |
Maximum operating temperature: 90°C (194°F) | |
Retention rating: | 0.04, 0.05, 0.1, 0.2, 0.45 and 1.0 μm |
Note: | ProcessGard® PES cartridge filters can be sterilized by autoclaving up to 25 cycles at 125°C (257°F) or sterilized by steam-in-place up to 10 cycles at 135°C (275°F) for 30 minutes at less than 0.3 bar differential pressure. |
PES Disposable: | |
Materials: | Membrane: Hydrophilic polyethersulfone |
Supports, core, sleeve: Polypropylene | |
Fitting connections: Flare, MNPT, FNPT, compression | |
Operating conditions: | Maximum forward differential pressure: 0.4 MPa (4.0 bar, 58 psi) @ 20°C (68°F) |
Maximum reverse differential pressure: 0.2 MPa (2.0 bar, 29 psi) @ 20°C (68°F) | |
Maximum operating temperature: 60°C (140°F) | |
Retention rating: | 0.05, 0.1, 0.2, 0.45 and 1.2 μm |
Note: | ProcessGard® PES disposable filters can be sterilized by autoclaving up to 25 cycles at 125°C (257°F) for 30 minutes. It cannot be in-situ steam sterilized. |
PP cartridge: | |
---|---|
Materials: | Membrane, supports, core, sleeve: Polypropylene |
O-rings (AS568-222): EPDM, fluoroelastomer, E-FKM (encapsulated fluoroelastomer) | |
Dimensions (nominal): | Length: 263 mm (10.35”) |
Diameter: 70 mm (2.75") | |
Operating conditions: | Maximum forward differential pressure: 0.4 MPa (4.0 bar, 58 psi) @ 20°C (68°F) |
Maximum reverse differential pressure: 0.25 MPa (2.5 bar, 29 psi) @ 20°C (68°F) | |
Maximum operating temperature: 80°C (176°F) | |
Retention rating: | 0.3, 0.6, 1, 3, 5, 7, 10, 20, 30 and 40 μm |
Note: | ProcessGard® PP cartridge filters can be sterilized by autoclaving up to 25 cycles at 125°C (257°F) or sterilized by steam-in-place up to 5 cycles at 135°C (275°F) for 30 minutes at less than 0.3 bar differential pressure. |
PP Disposable: | |
---|---|
Materials: | Membrane, supports, core, sleeve: Polypropylene |
Fitting connections: | Flare, MNPT, FNPT, compression |
Operating conditions: | Maximum forward differential pressure: 0.4 MPa (4.0 bar, 58 psi) @ 20°C (68°F) |
Maximum reverse differential pressure: 0.2 MPa (2.0 bar, 29 psi) @ 20°C (68°F) | |
Maximum operating temperature: 60°C (140°F) | |
Retention rating: | 0.3, 0.6, 1, 3, 5, 10, 20, 30, 40 and 70 μm |
Note: | ProcessGard® PP disposable filters can be sterilized by autoclaving up to 25 cycles at 125°C (257°F) for 30 minutes. It cannot be in-situ steam sterilized. |
PS Cartridge: | ||
---|---|---|
Materials: | Membrane | Hydrophilic polysulfone |
Supports, core, cage, end caps | Polypropylene | |
O-rings | EPDM, FKM, E-FKM | |
Retention rating: | 20 nm | |
Maximum Operating Conditions: | Maximum forward differential pressure | 0.34 MPa (3.4 bar, 49 psi) @ 20°C (68°F) 0.14 MPa (1.4 bar, 20 psi) @ 90°C (194°F) |
Maximum reverse differential pressure | 0.24 MPa (2.4 bar, 35 psi) @ 20°C (68°F) | |
Maximum operating temperature | 90°C (194°F) | |
Dimensions (nominal): | Length | 262.3 mm (CD-0, 10") |
Diameter | 70 mm |
Successfully Opted for software Updates