As automotive electronics become more complex and prevalent, the cost of failure in these devices rises. Hidden defects caused by small particles, gels, metal ions, and organic contaminants can lead to failures throughout the vehicle’s life, escalating costs and increasing risk. How can you prevent hidden defects?
As logic devices go to smaller line widths, 3D NAND architectures increase layers, and DRAM memory density increases, sensitivity to contamination and defects have a greater impact on device performance. To achieve optimum wafer yield and reliability, the microelectronics industry needs to address the increased materials consumption requirements and material purity challenges from chemical manufacture to point of use.
To enable the effective manufacturing of electronic devices for the Fourth Industrial Revolution, fabs (integrated circuit manufacturers) are challenged with producing denser and more complex chips with smaller line spacing and 3D features. The digital transformation we are all experiencing as consumers present new challenges to material makers, as well as opportunities. Contamination control remains one of the largest challenges as integrated circuit (IC) technology advances.
Control of airborne molecular contaminants (AMC) enable manufacturers of integrated circuits (IC) to improve their production yield and further assure the integrity of electronic devices. Contaminant removal is achieved with AMC filters throughout the fab environment and at the tool locations.
Lithographers in semiconductor manufacturing are tasked with the challenge of creating circuit patterns that meet production yield, parametric performance, and long-term reliability requirements in the electronic devices our digital lives depend upon. To do this, predicting and controlling variables in the manufacturing systems, materials, and processes are critical.
Semiconductor processing at advanced nodes requires extreme levels of cleanliness to minimize the risk of yield loss associated with submicroscopic contaminants. At Entegris, we understand these challenges and offer precision-engineered coatings that extend tool life while improving device yield.
Logic devices are getting smaller, and the introduction of 3D architectures that use vertical fins and nanowires in their gate design introduce more complexity to the fabrication process. As technology nodes shrink beyond 10 nm, new materials are required in both FEOL and BEOL processes to enable performance, yield, reliability and cos